Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Alameda
A chimney sweep in Alameda typically costs $180 – $340 for a standard cleaning, with older unlined brick chimneys usually landing at the higher end because they require more careful inspection and creosote removal. Most sweeps on the island take 60 – 90 minutes, though pre-1930 homes with heavy buildup or deteriorating mortar often take longer. If you live in Alameda and haven’t had your flue looked at in the past two years, the time to call is before you light the first fire of the season. We’re Sunstone Chimney Sweep, led by Noel Castruita, and we work throughout 94501 and 94502. Call (833) 593-0743 for a free estimate.

Why Sunstone Chimney Sweep Is Alameda’s Preferred Chimney Sweep Company
Alameda homeowners call us because we understand what this island’s housing stock actually requires. Most of the chimneys we work on in the Gold Coast, East End, and Fernside neighborhoods were built between 1890 and 1915, and they were never designed for modern gas inserts or the way we burn wood today. Noel Castruita has spent years working on these older systems, and our team’s approach is built around one principle: we don’t recommend a repair unless we can show you camera footage of exactly why it’s needed. That’s the standard we bring to every Chimney Sweep job on the island.
We’re not a brush-and-go crew. When we sweep a chimney in Alameda, we’re also looking at the condition of the flue liner, the damper, the crown, and the firebox because those are the components that fail first in a marine climate. Homeowners across 94501 and 94502 keep us on speed dial because they know we’ll tell them plainly when a chimney can safely wait another year and when it can’t. That honesty matters more here than in most cities, because Alameda’s older chimneys are uniquely prone to hidden damage that a surface-level sweep won’t reveal.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Maintenance in Alameda
Chimney maintenance in Alameda is less about routine dust removal and more about managing the effects of salt air, fog, and a century of deferred updates. On the island, a maintenance visit should always include a close look at the damper, crown, and any exposed masonry joints, because those are the first things the bay air attacks. We tell homeowners to think of it this way: a chimney on the Oakland side of the estuary might go five years between inspections with no visible wear. The same chimney on Fernside or the Gold Coast can show rusted damper hardware and spalled mortar in two years. That’s not a guess; it’s what we see every week in Alameda.
A standard maintenance visit in Alameda runs $120 – $200, depending on the height of the chimney and how much creosote has accumulated. If we find components that need attention, we document everything with photos and show you before recommending any additional work. No one should be pressured into a $5,000 liner replacement without seeing the evidence for themselves.
Seasonal Pre-Burn Checks
September through November is when Alameda homeowners book the bulk of their maintenance work. The first cold snap rolls in off the bay, and suddenly every fireplace in the East End is getting lit. A pre-burn check confirms the damper opens and seals, the flue is clear, and the chimney cap hasn’t rusted through during a foggy summer. We schedule these as quickly as possible because October and early November fill up fast across the island.
Creosote and Soot Removal
Creosote removal in Alameda homes built before 1930 often takes longer than in newer construction because the original unglazed brick flues create rough surfaces where creosote grabs hold. We use rotary brushes and hand tools suited to the flue material, not just whatever attachment is on the truck. After removal, we vacuum the firebox and damper shelf so there’s no soot track back into the living room.
Chimney Sweep Services in Alameda
Chimney sweep services in Alameda cover full flue cleaning, firebox cleanup, damper inspection, and a visual check of the chimney’s exterior components. For a typical island home with moderate wood use, a sweep runs $180 – $280. For heavier buildup, or when we’re working on an older chimney with a parged interior that’s begun to shed, expect $280 – $340 because of the extra time involved. We’re up front about pricing before we start, so there’s no surprise line item at the end of the visit.
When we sweep a chimney in Alameda, we’re not just pulling a brush through and calling it done. We’re looking at the whole system: the flue path, the smoke shelf, the damper plate, the firebox walls, and the exterior crown. On the island, that exterior check matters more than most people realize. Fog and salt air rust chimney caps and damper hardware, and a chimney that looks fine from the street can have a seized damper and a crumbling crown a few inches out of sight.
Open Fireplace Sweep
An open fireplace with a properly functioning flue is still the most common setup we service in Alameda’s Victorian and Edwardian homes. We clean the full flue length, vacuum the firebox, and test the damper by hand before we leave. If the damper doesn’t close cleanly, we’ll tell you and explain your options. The fix may be simple or it may point to a deeper issue, but you’ll see it for yourself.
Gas Insert and Wood Stove Cleaning
Alameda homeowners increasingly vent gas inserts and wood stoves through chimneys that were built for coal or open wood burning. Those flues were never intended for the temperature and moisture profiles of a modern insert. We clean these systems carefully because the clearance between the insert’s vent pipe and the old brick flue is often where hidden problems begin. A camera run through the flue shows exactly what’s happening.

Trusted Brands We Service in Alameda
We stock and install professional-grade components from Olympia Chimney, Famco, and Copperfield, plus we carry DuraFlex flexible liners and HeatShield ceramic resurfacing materials. These are the same trade lines used by chimney restoration specialists across the country, not consumer-grade parts from a hardware store shelf. What that means for Alameda homeowners is practical: when we find a rusted damper or a failing liner on a Gold Coast Queen Anne, we can source the correct replacement without waiting weeks. The parts we install are built to handle the conditions on this island. Salt air doesn’t give them a pass, but they hold up far better than generic imports.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Alameda Homes
- Unglazed brick flues from the 1890s through 1910s. These original flues were never designed for modern gas or wood inserts, and decades of heating and cooling cycles have left internal cracks that smoke tests won’t always catch. A camera inspection reveals what’s actually there.
- Rusted dampers and seized hardware. Living a few blocks from the bay means constant moisture exposure. Dampers in Fernside and the East End seize up at twice the rate we see inland, even on chimneys that look perfectly maintained from the ground.
- Spalled clay-tile liners with deteriorated mortar joints. Older Alameda homes with clay-tile liners often have mortar erosion between the tiles. Creosote accumulates behind those tiles where a brush on a rod can’t reach. This is a fire-safety issue that routine sweeping alone doesn’t solve.
- Crumbling mortar crowns and rusted chimney caps. We regularly find crowns that have turned to loose gravel and caps that look like they’ve been sitting in salt water. The fog in Alameda does more damage in five years than a decade of dry inland weather would.
One recent job sticks with us. We worked a Queen Anne on the Gold Coast where a homeowner had just installed a new gas insert into an original unlined brick chimney. Our tech ran a camera and found the parged interior crumbling and a seized damper, classic for island homes where salt air eats metal. We showed the homeowner the footage, recommended a HeatShield liner only after they saw the spalling with their own eyes, and left the firebox safe for the season. That’s the standard: no recommendation without evidence you can see.
Pricing for Chimney Sweep in Alameda, CA
Here’s what you can expect to pay on the island, based on the work we do here most often.
- Standard chimney sweep: $180 – $280
- Sweep with heavier creosote buildup: $280 – $340
- Chimney maintenance visit with minor component checks: $120 – $200
- Camera inspection of the flue interior: $95 – $150, often included with a sweep when we suspect hidden damage
- Level 2 inspection (for older homes, real estate transactions, or after an insert install): $250 – $400
What pushes a price toward the top of the range in Alameda is usually flue length, the amount of creosote present, and whether the chimney is on a steep roof section that requires more careful setup. We’ll give you a flat price before we begin, so there’s no surprise math at the end. Call (833) 593-0743 for a free estimate, and we’ll talk through what your chimney actually needs, not what a script says you should buy.
We Also Serve Cities Near Alameda
In addition to our work across Alameda, we serve Piedmont, Berkeley, the Mission District, and Chinatown. If you live near the island and want a team that understands older Bay Area housing stock and marine-climate chimney wear, we’re glad to help. Many of our Alameda customers refer neighbors and family in surrounding communities. Wherever you are, we bring the same camera-first approach and no-pressure reporting.
Serving Alameda, CA – Our Local Coverage Area
We’re based in the Alameda area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Alameda
Maybe, but not without a close look first. Original unlined brick chimneys from the 1890s through 1910s were never designed for modern burning, and many have internal cracks, deteriorated parging, or structural movement that a simple sweep won’t reveal. In Alameda’s marine climate, the risk is compounded by years of moisture getting into the brick. We run a camera through the flue and show you what we find. If the flue is sound, you can burn with normal precautions. If it’s not, you’ll see exactly what’s failing. Call (833) 593-0743 to schedule an inspection.
Because you live on an island. The salt-laden fog that rolls through Alameda, especially in summer and early fall, penetrates damper hardware and accelerates rust. Dampers on the Gold Coast, Fernside, and the East End seize up far faster than on the Oakland side, even when the chimney appears fine from the ground. We check the damper by hand on every sweep and tell you plainly whether it’s a simple fix or a sign of broader water intrusion. Call us to have it looked at before you reach for another can of WD-40.
Every two years is the minimum we recommend for occasional wood burning in Alameda. If you burn weekly during the winter, go annually. The island’s damp air causes creosote to harden and bond to flue walls differently than in dry climates, and older brick flues with rough interiors collect buildup faster than you’d expect. An annual or biennial sweep paired with a quick damper and crown check catches rust and mortar erosion before they become expensive repairs.
A Level 1 inspection is a visual check of the accessible portions of the chimney and flue, what we do on every routine sweep. A Level 2 inspection adds a camera run through the full flue length and is the right choice for older Alameda homes, real estate transactions, or any chimney that’s been changed, like a new gas insert vented into an old flue. We recommend a Level 2 on most pre-1930 island homes at least once, because the camera reveals what a visual check cannot. Call (833) 593-0743 and we’ll help you decide which level fits your situation.
We can remove third-degree creosote with rotary brush systems and specialized tools, but whether the chimney is safe afterward depends on the condition of the flue behind the creosote. In Alameda’s older brick chimneys, hardened creosote often hides cracks, spalled mortar, or failing tile joints. We remove the buildup first, then run a camera to see what’s underneath. If the flue is sound, you’re done. If it’s not, we show you the footage and explain your options without pressure. Call (833) 593-0743 to schedule a sweep and get an honest assessment.
Written by Noel Castruita, Owner at Sunstone Chimney Sweep, serving Alameda and surrounding Bay Area communities.